Pegler Yorkshire
VSH Tectite Commercial Valve Range Expands
Following the successful launch of the revolutionary new VSH Tectite Flexible Metal plumbing system, Pegler has announced an addition to its valve range – the VSH Tectite TX300 Full Bore Quarter Turn Lever Ball Valve.
Aaron Carter, Pegler Yorkshire’s marketing manager for Tectite said: “The VSH Tectite range is rapidly growing as more and more installers, specifiers and contractors catch on to its many benefits. The VSH Tectite Ball Valve is yet another product launched by Pegler to complement the range of highly efficient push-fit end technology products.”
Many contractors, particularly in the commercial valves market, place emphasis on the importance of product longevity, quality engineering, cost-effective and straightforward commissioning and maintenance procedures. VSH Tectite push-fit end technology, as found with the Ball Valve, addresses all of these elements and then some.
Heat free jointing offers many advantages, such as the ability to install without a hot works permit and therefore avoiding associated administration costs. Less COSHH controls, fewer specialist tools and lower insurance premiums. Labour time saving is another distinct advantage, as there is no longer a requirement to stay on site for up to two hours following the use of heat as a precautionary measure to guard against fire. Added to this is a reduction in the time required to fully flush a system for the removal of flux. Furthermore, with technical advancements metal push fit fittings are also available in larger sizes, making them suitable for a greater number of applications across more pipe types and sizes.
The new VSH TX300 Ball Valve embodies the VSH Tectite ethos boasting grip first grab rings which prevent any risk of full bore failure, pre-lubricated seals for reduced insertion force and a DZR brass body which conforms to the latest European Drinking Water legislation. As with the whole VSH Tectite portfolio the TX300 offers tried and tested technology with the advancements and quality assurance only found with products by Pegler.
Additional features offered by the new VSH Tectite Ball Valve include; a unique lever design that incorporates a locking feature, red and blue inserts for hot and cold water services identification, blow out and vandal proof stem assembly, available in sizes 15mm and 22mm tube connections and is suitable for connection to a wide range of popular tube types.
Aaron continued: “Pegler places huge emphasis on gaining independent approvals and providing assured quality products. The VSH Tectite TX300 Ball Valve boasts WRAS approval and also benefits from a date code for audit traceability. This is a great Tectite addition to both the domestic and commercial Valves ranges and will ensure greater system choice for installers, specifiers and contractors.”
Pegler’s approach in the development of this product has been driven by developing relationships with the contractors and installers who work with commercial and domestic valve products. From the resulting ideas and feedback this has generated, the VSH Tectite commercial valve range of new products is continuing to evolve which will see an influx of quality assured inherently practical products that will complement most applications.
For further information about any of Pegler’s products call 01302 560 560 or email brochures@pegleryorkshire.co.uk.
PEGLER YORKSHIRE INTRODUCES MECHANCIAL GROOVED PIPING SYSTEM TO RANGE
Pegler Yorkshire is introducing a mechanical grooved piping system to its portfolio. Under the brand VSH Shurjoint, this new range will complement the company’s renowned brands such as VSH XPress and VSH Tectite offering fully integrated piping systems.
Pegler Yorkshire Extends Tooling Range
Pegler Yorkshire, the leading UK manufacturer of VSH XPress fittings has expanded its range of tools to meet the demands of the marketplace.
Pushing the Boundaries - VSH Tectite Receives BSI Kitemark Standard
Pegler Yorkshire has raised the bar by being the first manufacturer to achieve the prestigious BSI Kitemark across its range of push-fit fittings.
PEGLER YORKSHIRE – FIRST TO INTRODUCE LARGE SCALE PRESS FITTINGS INTO UK MARKETPLACE
Pegler Yorkshire has extended its stainless steel VSH XPress Press Fit range of fittings to included sizes up to 168mm - a first for the UK market.
Put An End To ‘Pressing’ Jobs With A Combined Toolkit
As the rise of more modern jointing techniques such as push and press continues leading manufacturer, Pegler Yorkshire, has launched a combined toolkit that gives installers the right equipment to speed up installations.
Tectite makes plumbers’ lives easier – and slashes installation times
Rigorous testing has shown that Pegler Yorkshire’s innovative Tectite push-fit system can cut installation times by up to 75% without sacrificing durability and versatility.
Pegler Yorkshire Launches Essential Tool for HVAC Installers
Pegler Yorkshire has brought to market a tool that no HVAC installer should be without!
The Tectite Tube Straightener exclusively supplied by the company has been launched for 15mm pipe sizes.
Push and Press - Like Two Peas in a Pod
While the plumbing industry continues to debate the merits of both push and press, there has been a noticeable rise in the amount of systems being installed that now benefit from a combined approach.
VSH Tectite Commercial Valve Range Expands
Following the successful launch of the revolutionary new VSH Tectite Flexible Metal plumbing system, Pegler has announced an addition to its valve range – the VSH Tectite TX300 Full Bore Quarter Turn Lever Ball Valve.
Tectite Flexible Metal System - A Revolution by Pegler Yorkshire
Pegler Yorkshire is pleased to announce the future in domestic plumbing for the UK! The company has drawn on 125 years of British manufacturing to create the unique Tectite Flexible Metal system, a product like no other on the market.
TMVs Now Boast Tectite Technology
As a continuation of product development by renowned plumbing systems manufacturer Pegler Yorkshire, the company has announced the launch of a new valve. The Tectite TMV series combine the latest in metal push-fit technology with the ultimate protection against hot water scalding and thermal shock.
Kuterlite delivers PROfessional results every time
When installers need compression fittings that deliver enhanced performance, valves and fittings specialist Pegler Yorkshire has always been the first choice. By operating a policy of unceasing product development, Kuterlite has established itself as the market leader and reputation set to be reinforced further by the improved Kuterlite fitting – the K900-Pro.
The Tectite Push-Fittings Range
The direct benefits derived from using push-fittings including speed of installation, heat and solvent free jointing and the need for only basic tools, can now be realised in more applications and across more pipe types and sizes.
Instant Jointing Techniques By Pegler Yorkshire
Push-fit fittings started to appear in the UK during the 1980s in flexible systems. Originally established as simple technology only suitable for light duty has now matured and evolved into thoroughly professional metal fitting systems capable of performing at a very high level in a wide range of applications.
Pegler Yorkshire Fitting Raises the ‘Car’ and Vital Funds for Charity
The strength of one of Pegler Yorkshire’s fittings has been put to the test in a David and Goliath experiment on site in Doncaster.
Pegler Yorkshire takes the heat out of the Thermostatic Valves Market with two valves in one
As a recognised innovator and market leader in the field of Thermostatic Mixing Valves (TMV), Pegler Yorkshire has once again responded to changing regulations...
Pegler Yorkshire introduces the XPress sprinkler system to the UK
The Fire Protection market is one place where there can be no compromise when it comes to the quality and integrity of a product.
A TMV Can Make Sense of Part G
Following years of campaigning by charities, trade organisations and manufacturers, the government has now announced that hot water safety will be addressed in the revised edition of the Building Regulations, Part G.
New XPress Gas Range in Satisfying Larger Sizes
Pegler Yorkshire introduces an extension to the XPress copper gas range, with a comprehensive new choice of sizes from 15mm to the extra large 108mm.
Save Time and Trouble with A Tectite Sprint Socket Depth Gauge
Pegler Yorkshire has now introduced a unique Tectite Sprint Socket Depth Gauge. This unique three in one device has been designed especially for the Sprint range to make life for the installer as easy and trouble free as possible and allows Tectite Sprint to be prepared and installed speedier than ever!
XPress Carbon from Pegler Yorkshire
The XPress Carbon range of press-fit fittings from Pegler Yorkshire includes 67mm fittings, making XPress Carbon the only UK carbon steel press-fit System available in this size.
New TMV for Pegler Yorkshire
The South Yorkshire based Pegler Yorkshire Group continues to invest in new technology, with several new product launches planned for this year, including a new Thermostatic Mixing Valve (TMV) range, backed by millions of pounds of investment in new machinery throughout the business.
Why use four fittings when XPress S32 Multi-Port does it in one?
Introducing the XPress S32 Tee, Female Branch Multi-Port from Pegler Yorkshire – the latest product to join the innovative XPress Copper range as part of the company’s policy of continuous product development.
Reduce Water Wastage With Optiflush
In these days of increasing concerns over water conservation, the Optiflush from Pegler Yorkshire can make a real difference to saving water. Suitable for all pressures from 0.05 bar to 12 bar, the Optiflush can reduce water usage by up to 80%.
Put Your Faith In The Original Yorkshire Fitting
In today’s competitive marketplace, it is not unusual to see cheap imitation products made available to trap the unwary. While this may not be a problem when buying a pair of jeans, it can raise serious issues when buying products that are needed to perform an essential job.
